Electronics

  • FPV Remote Controller

    FPV Remote Controller

    $200.00

    FPV Remote Controller
    This remote control introduces Manual mode alongside Normal and Sport modes

    Add to cartDone
  • iFlight BLITZ 5.8Ghz 2500mW 2.5W MMCX VTX

    iFlight BLITZ 5.8Ghz 2500mW 2.5W MMCX VTX

    iFlight BLITZ 5.8Ghz 2500mW 2.5W MMCX VTX FPV Long Range Transmitter Built-in Microphone Dual Cooling For RC FPV Drone Airplane

    View productsDone
  • Lumenier LUX F4 HD Ultimate Flight Controller

    Lumenier LUX F4 HD Ultimate Flight Controller

    $70.00

    The Lumenier LUX F4 HD Ultimate Flight Controller is full of features including a plug for DJI HD system, 3rd generation IMU ICM42688-P, dual plug-and-play 4in1 ESC ports, 12x PWM outputs, barometer, OSD, 6x UARTs, 9-16V BEC, dual analog camera inputs, easy soldering layout and much more…

    Features

    • STM32F405 has 1MB flash which can run ArduPilot/INAV/BetaFlight
    • InvenSense the 3rd generation IMU ICM42688-P
    • 9-60V(3~12S LiPo) wide input voltage and voltage sense. and a 9~16V BEC for DJI OSD or analog VTX.
    • 8motors+3servos in INAV/BF multirotor mixer.
    • 2x SH1.0_8pin connector for PnP with 2x 4in1 ESC
    • 1x SH1.0_6pin connector for PnP with HD System(Caddx Vista & Air Unit)
    • USB pin breakout for connecting to external USB adapter.

    Specifications

    • MCU: STM32F405RGT6
    • IMU: ICM42688-P
    • OSD: AT7456E, DJI OSD
    • Baro: SPL06-001 (I2C)
    • Blackbox: 16M-byte Flash memory
    • 6x UARTs,  1x Softserial_Tx option
    • 12x PWM outputs (8x Dshot)
    • 1x I2C
    • 4x ADC (VBAT, Current, RSSI, Airspeed)
    • 2x PINIO
    • 2x SH1.0_8pin connector for 4in1 ESC
    • 1x SH1.0_6pin connector for HD System(Caddx Vista & Air Unit)
    • 3x LEDs for FC STATUS (Blue, Green) and 3.3V indicator(Red)

    Power

    • Input: 9~60V (3~12S LiPo)
    • BEC: 5V 1.5A
    • BEC: Vx,  9~16V/1~2A (3S IN/9V 2A, 4S IN/12V 2A, 6S IN/16V 2A, 8S IN/16V 1.5A, 12S IN/16V 1A)
    • Battery Voltage Sensor: 1K:20K (INAV scale 2100, BF scale 210)
    • No Current Sensor built-in, supports external current sensor of PDB/4in1

    Firmware

    • INAV: MATEKF405TE (Pre-loaded by default)

      • With INAV firmware, DSHOT can not work on S3, S5,S7 because of DMA clash,  use ONESHOT or MULTISHOT and calibrate ESC PWM range.

    • BetaFlight: MATEKF405TE
    • ArduPilot: MatekF405-TE

    Physical

    • Mounting: 30.5 x 30.5mm, Φ4mm with Grommets Φ3mm
    • Dimensions: 36 x 36 x 5 mm (9mm max height including regulator board)
    • Weight: 8.5g
    Add to cartDone
  • Placeholder

    Video Components Bundle

    $44.99

    This is a bundle of the three components of the video sub-system of the Ukrainian Army’s standardized FRV drone. It includes either a day time or a night thermal camera camera, video transmitter (VTX), and an antenna .

    Select optionsDone This product has multiple variants. The options may be chosen on the product page