5.8G FPV Antenna Adapter Connector for Drones
$10.005.8G Antenna, Connector, and Adapter For FPV Drones
Showing all 8 results
-
-
5.8GHz 3W Video FPV Transmitter VTX 48CH 25mW/3000mW
$60.005.8GHz 3W Video FPV Transmitter VTX 48CH 25mW/3000mW
1.5.8G 48 frequency points: (A.B.E.F.R.L; 5362MHz-5945MHz);
2. Maximum power: 3W (25mW/1000mW/2000mW/3000mW,adjustable);
3. Input voltage: DC 7V-36V, support 2-8S battery input.
4. Antenna interface: MMCX
5. Communication protocol: IRC
6. Fan heat method: aluminum alloy heat sink + fan
7. Mounting hole: 30.5mm*30.5mm / ø3.15mm
8.Product size: 37.7mm*36.1mm*11mm
9.Product weight: 16g -
HDZero ECO FPV System
$70.00The HDZero ECO FPV System is designed to bring digital FPV to more pilots by offering a low-cost, lightweight, and durable alternative to analog video.
-
Lumenier LUX F4 HD Ultimate Flight Controller
$70.00The Lumenier LUX F4 HD Ultimate Flight Controller is full of features including a plug for DJI HD system, 3rd generation IMU ICM42688-P, dual plug-and-play 4in1 ESC ports, 12x PWM outputs, barometer, OSD, 6x UARTs, 9-16V BEC, dual analog camera inputs, easy soldering layout and much more…
Features
- STM32F405 has 1MB flash which can run ArduPilot/INAV/BetaFlight
- InvenSense the 3rd generation IMU ICM42688-P
- 9-60V(3~12S LiPo) wide input voltage and voltage sense. and a 9~16V BEC for DJI OSD or analog VTX.
- 8motors+3servos in INAV/BF multirotor mixer.
- 2x SH1.0_8pin connector for PnP with 2x 4in1 ESC
- 1x SH1.0_6pin connector for PnP with HD System(Caddx Vista & Air Unit)
- USB pin breakout for connecting to external USB adapter.
Specifications
- MCU: STM32F405RGT6
- IMU: ICM42688-P
- OSD: AT7456E, DJI OSD
- Baro: SPL06-001 (I2C)
- Blackbox: 16M-byte Flash memory
- 6x UARTs, 1x Softserial_Tx option
- 12x PWM outputs (8x Dshot)
- 1x I2C
- 4x ADC (VBAT, Current, RSSI, Airspeed)
- 2x PINIO
- 2x SH1.0_8pin connector for 4in1 ESC
- 1x SH1.0_6pin connector for HD System(Caddx Vista & Air Unit)
- 3x LEDs for FC STATUS (Blue, Green) and 3.3V indicator(Red)
Power
- Input: 9~60V (3~12S LiPo)
- BEC: 5V 1.5A
- BEC: Vx, 9~16V/1~2A (3S IN/9V 2A, 4S IN/12V 2A, 6S IN/16V 2A, 8S IN/16V 1.5A, 12S IN/16V 1A)
- Battery Voltage Sensor: 1K:20K (INAV scale 2100, BF scale 210)
- No Current Sensor built-in, supports external current sensor of PDB/4in1
Firmware
- INAV: MATEKF405TE (Pre-loaded by default)
-
With INAV firmware, DSHOT can not work on S3, S5,S7 because of DMA clash, use ONESHOT or MULTISHOT and calibrate ESC PWM range.
-
- BetaFlight: MATEKF405TE
- ArduPilot: MatekF405-TE
Physical
- Mounting: 30.5 x 30.5mm, Φ4mm with Grommets Φ3mm
- Dimensions: 36 x 36 x 5 mm (9mm max height including regulator board)
- Weight: 8.5g
-
Recon HD FPV Goggles
$280.00Image quality is achieved with a 1080p display viewed through a folded optical engine. The 3.5” panel delivers a crisp 44-degree FOV image at 60 fps with compatibility with many transmitters these. HD FPV Recon Goggles are high-performance goggle at an affordable price while maintaining anti-fog fan features.
-
RUSHFPV RUSH MAX SOLO 5.8GHz 2.5W VTX 5.8G CNC Shell Built-In Cooling Fan
RUSHFPV Rush Max SOLO 5.8GHz 2.5W 37CH VTX w/ Smart Audio.
-
SKYZONE Cobra X V2 1280×720 5.8G 48CH Steadyview RapidMix Receiver with Head Tracker DVR FPV Goggles Video
The SKYZONE Cobra X * is a FPV goggle with 1280*720 high resolution LCD screen , the screen has vivid color and high Luminance ,
-
SKYZONE Cobra X V2 1280×720 5.8G 48CH Steadyview RapidMix Receiver with Head Tracker DVR FPV Goggles Video
$275.00The SKYZONE Cobra X * is a FPV goggle with 1280*720 high resolution LCD screen , the screen has vivid color and high Luminance ,